Elegoo Centauri Carbon 2 Spaghetti Due to Poor Bed Adhesion

This is the most common cause of spaghetti failures. Confirm adhesion failure by inspecting the base of the dislodged print; a smooth, glossy bottom surface or a complete lack of 'squish' in the initial layer lines indicates insufficient bonding. Verify that the build plate is free of skin oils by wiping it with a clean cloth. Confirm the Z-offset accuracy by reviewing the most recent full-auto calibration report in the touchscreen interface, ensuring the nozzle height at the start of the print is low enough to physically press the molten filament into the textured surface of the build plate.

Sources