Clean the Chamber Camera Lens and Calibrate Lighting

Materials Needed: Q-tip, Isopropyl Alcohol (IPA).

1. Power off the printer and allow the chamber to cool completely.
2. Lightly dampen the Q-tip with a small amount of IPA.
3. Gently wipe the surface of the internal chamber camera lens to remove any film or debris.
4. Use a dry end of the Q-tip to remove any remaining streaks.
5. Power on the printer and verify that the chamber LED lights are set to 'On' in the device settings.
6. Initiate a test print to confirm the AI successfully monitors the first layer without false positive alerts.