Clean the Build Plate to Restore Adhesion

1. Remove the build plate from the printer and take it to a sink. 2. Apply a small amount of grease-cutting dish soap to the surface. 3. Use a clean, grease-free sponge to scrub the entire surface thoroughly with warm water. 4. Rinse the plate completely to remove all soap residue. 5. Dry the plate thoroughly with a clean, lint-free cloth or paper towel. 6. Reinstall the plate into the printer, ensuring you do not touch the build surface with your fingers to prevent transferring new oils. 7. Verify the fix by starting a test print and observing the first layer bonding to the surface without signs of lifting or detachment.

Sources