Clear and Clean the Drain Pump Impeller

Safety Precaution: Ensure the appliance is unplugged and the area is clear of spilled water. If the wash was hot, allow the machine to cool to prevent burns.

1. Place a shallow container or towel under the filter flap to catch residual water.
2. Carefully unscrew the drain filter cap and remove it.
3. Use a small tool or gloved fingers to extract any debris, coins, or lint from the pump housing and impeller area.
4. Manually rotate the impeller to ensure it spins freely without any grinding or physical resistance.
5. Reinsert the filter, ensuring it is tightened securely to prevent leaks.
6. Plug in the machine and run a short 'Drain/Spin' cycle to verify the error has cleared and the pump operates silently.