Incorrect temperature settings can lead to poor adhesion, causing the spaghetti failure. Ensure your filament settings match the manufacturer's recommended range.
- Open the Filament settings in Bambu Studio.
- Verify that the Nozzle Temperature for the first layer matches the material technical data sheet.
- If using a generic filament, manually adjust the temperature by +5-10°C to improve flow and adhesion.
- Save the profile and resend the print job to the printer.
Verification: Monitor the first layer adhesion; the filament should lay down flat without curling at the edges.
Sources
Comments
Sign in to join the conversation
Sign InNo comments yet. Be the first to share your thoughts!