Synchronize Slicer Material Profiles with Printer Firmware

1. Open your slicer software (e.g., Bambu Studio or Cura) and navigate to the 'Filament' or 'Material' settings tab.

2. Select the correct material profile for 'PLA' and verify that the nozzle temperature is set within the 190°C–220°C range and the bed temperature is set to 50°C–60°C.

3. Export the updated G-code file from the slicer.

4. Access the 'Material' or 'Filament' management menu on your 3D printer's physical control panel or touchscreen interface.

5. Ensure the active material profile on the printer matches the 'PLA' setting defined in your slicer software.

6. If the printer allows for profile synchronization or preset importing, perform a sync to ensure the firmware configuration aligns with the slicer's exported parameters.

7. Initiate a test print to verify that the printer no longer displays a material mismatch notification.

Sources