Synchronize Slicer Build Plate Selection

To ensure the printer adheres to the correct Z-height and thermal profile, verify the plate in Bambu Studio matches the physical plate installed.

1. Open your project in Bambu Studio.
2. Navigate to the Printer settings tab.
3. Under Plate, select the specific plate currently in the printer (e.g., Textured PEI Plate, Smooth PEI Plate, or Engineering Plate).
4. Reslice the file and ensure the printer selection on the device screen matches the G-code command.

Verification: Start a test print and observe the first layer; the nozzle should be at the optimal height for the selected surface type.

Sources