Reconfigure I2S Data Signal Mapping

To resolve the signal mismatch, you must ensure the physical pinout of your source transmitter matches the input requirements of your receiver. Follow these steps:

1. Safety Precaution: Power down all audio equipment and disconnect power cables before modifying connections to prevent electrical shorts.
2. Consult Documentation: Obtain the official technical pinout diagrams (e.g., HDMI or RJ45 pin assignments) from the manufacturers of both the source and the receiving DAC.
3. Verify Pin Alignment: Use a multimeter in continuity mode to confirm that the Data, BCLK, and LRCLK pins on the source cable end correspond exactly to the designated inputs on the receiver.
4. Correct the Mapping: If the pins are misaligned, construct a custom adapter or re-terminate the cable to re-route the signal lines so that Data, BCLK, and LRCLK are mapped to the correct receiver input pins.
5. Verify the Fix: Once reconnected, power on the system and initiate playback; a successful fix will be confirmed by the immediate restoration of clear, non-distorted audio output.