Clean and Dry E-Bike Electrical Connectors

Safety Warning: Power off the battery and remove it from the bicycle before performing any maintenance on electrical components.

1. Disconnect the affected cable connectors by gently pulling them apart.
2. Inspect for debris or moisture.
3. Allow the connectors to air dry in a well-ventilated area for at least 24 hours.
4. If oxidation is present, use a specialized electrical contact cleaner spray to gently remove the buildup.
5. Ensure the pins are completely dry, then firmly reconnect the cables, aligning any 'arrow-to-arrow' markings to ensure proper pin orientation.
6. Reinstall the battery and power on the system to verify the error code has cleared.

Sources