Apply Professional Clipper Oil to Blade Surface

1. Ensure the clipper is switched off and unplugged from the power source.

2. Apply 2-3 drops of professional-grade clipper oil directly onto the center and both ends of the top moving blade.

3. Switch the device on and allow it to run for 5-10 seconds to ensure the lubricant distributes evenly across the blade interface.

4. Use a clean, soft cloth to wipe away any excess oil to prevent hair accumulation.

5. Verify the fix by operating the device; the metallic friction noise should cease, and the blade assembly should remain cool to the touch during use.

Sources