Stark Varg Water Pump Error
“My stark varg is overheating and I have a water pump error”: checks debris, radiator failure and airlock.
Still open
33
AS5047P Signal Too Noisy With a VESC Controller
“I'm using an as5047p encoder with a VESC compatible controller and the signal from the as5047p is too noisy”: checks electromagnetic interference, incorrect wiring mapping and hardware RC filtering.
Still open
10
Tesla alert CC_a001 when charging with Wall Connector
Checks: insufficient grounding with wall connector, improper facility grounding where the wall connector is installed and incorrect wall connector DIP switch settings.
Still open
20
Singer Featherweight Troubleshooting
Covers: nothing happens when pressing pedal, machine runs slowly or sluggishly and light doesn't turn on.
Still open
00
Kawai CP119 ignoring Dynamic Touch
“My kawai cp119 electric piano has certain keys that ignore dynamic touch and intermittently play at full volume”: checks oxidation, rubber degradation and contamination.
Still open
00
Windows container on Linux
“Is it possible to run windows 11 in a docker contaiiner on linux?”: covers windows 11 execution in docker on linux issues, attempting native windows container execution and native windows container incompatibility with linux kernel.
Solved · Deploy Windows 11 via KVM-accelerated Docker Container
00
bambulab h2s tpu 70a recreus
“Las piezas que imprimimos con TPU 70 de recreus con la bambulab h2s con boquilla de recreus de 2.2 mm no nos salen con buen acabado.”: checks melt zone pressure instability at high speeds, mechanical constraint or buckling and moisture absorption.
Still open
00
TPU Creality CR-M4
“Mi cr-m4 no extruye bien tpu 70”: checks internal filament buckling, filament moisture and incorrect slicer settings.
Solved · Optimize Extrusion Parameters and Mechanical Feed for TPU 70A +1
00
Subaru Tribeca B9 2007 P0011 P0021
“Subaru tribeca b9 p0021 diagnostic code”: checks clogged AVCS oil filter screen, oil control valve malfunction and dirty or low engine oil.
Still open
00
BambuLab Spaghetti Mid Print
Checks: SD card corruption, heat creep and thermal clogging and loss of bed adhesion.
Solved · Replace and Reformat the microSD Card
23
Loreal Casting creme gloss didn't cover grays properly
“Loreal casting cream not covering grays properly”: checks application barriers, premature post-application shampooing and product limitations.
Still open
00
ignition issue
“My alfa romeo gtv 2000 from 1973 has an inconsistent ignition, seems to be with the spark trigger from the distributor”: checks ignition system failure, major mechanical failure and fuel delivery failure.
Still open
00
sony headset
“My sony wh-1000x m3 do not connect on multi devices over bluetooth”: checks hardware architecture, firmware conflict and voice assistant active.
Still open
00
I'm experiencing lower back pain
“Im experiencing lower back pain”: checks lumbar bulging disc, degenerative disc-related lumbar bulging and muscle spasms.
Still open
00
my drone flips on takeoff
“My drone flips on takeof”: checks incorrect motor mapping, incorrect propeller placement and incorrect flight controller orientation.
Still open
00
There is a bad smell coming from the sink
Checks: dry p-trap, missing p-trap and biofilm and debris buildup.
Solved · Refill and Seal the P-Trap to Restore the Water Barrier
00
The table leg is wobbly
Checks: loose hardware or joints, worn or missing glides and seasonal wood movement.
Solved · Tighten and Reinforce Table Hardware and Joints
00
My flux capacitor is not lighting up
Covers: flux capacitor not lighting up, time machine flux capacitor issues and onboard nuclear reactor missing plutonium.
Still open
00
My robot vacuum won't charge
Checks: dirty charging contacts, software or firmware glitches and battery degradation.
Solved · Clean Robot Vacuum and Docking Station Charging Contacts
00
The circuit breaker triggers when I turn on the light
Checks: defective light switch, loose or damaged wiring and faulty light bulb.
Solved · Replace the defective light switch with a new unit
00